Full text of "Minolta RD-175 Instruction manual"

See other formats

MINSLIA

Digital Camera
RD-175

[E] Software Instruction Manual

Compatible with

Windows*Me/2000
Mac 0S 9.0.4
(Blues&White 63/64)

The old version of the software isn’t guaranteed to operate correctly on
Windows® Me/2000, or on Mac OS 9/9.0.2/9.0.4/9.1. Use the current

version of the software (2.0) on these operating systems.

This manual does not provide instructions for the basic operation of personal
computers, or the basic operation of Windows® or Macintosh operating
systems.

Please refer to the manual that came with your computer for information on
the above mentioned topics.

* This instruction manual may not be copied either in part or in its entirety without the
prior permission of Minolta Co., Ltd.
© 2001 Minolta Co., Ltd.

* Every precaution has been taken to ensure the accuracy of this material. Please
contact Minolta if you have any questions, find any mistakes or notice missing
information.

* Minolta cannot accept responsibility for any loss, damage or other problems caused
by use of this software.

* With the exception of personal, home or equivalent use No part of book, magazine,
music, or other copyrighted material may be used, copied or revised without the prior
permission of the author or copyright holder.

* Microsoft? and Windows? are registerded trademarks in the United States and other
countries of Microsoft Corporation.

* The official name of Windows? is Microsoft? Windows? Operating System.

* Pentium? is registered trademark of Intel Corporation.

* Apple, the Apple logo, Macintosh, Power Macintosh, QuickTime, Mac OS and the
Mac OS logo are registered trademarks of Apple Computer, Inc.

* Adobe? and Photoshop" are registered trademarks of Adobe Systems Incorporated.

* Other company and product names are the trademarks or registered trademarks of
their respective owners.

TABLE OF CONTENTS

TABLE OF CONTENTS
ВЕҒКОНЕ-ҮОПБЕСІМ; 225молымилвммиесаена леныне мы латын 4 SIARHTING. THE SOFTWABE........: nete eae Eod niea re rta 32
ТЕНМ5 0ЗБЕП ІМ ТНІ5 МАМОАІ..............ееыштғ. 4 РОВ МЛМООМУ5° 95/98/985Е/Ме/\ТА.0/2000................................................. 33
Starting the software from a TWAIN-compatible
SYSTEM REQUIREMENTS (WINDOWS?)................ eere 6 ітаде ргосеввіпд аррісайоп.............аыш 33
Weegee TEE as a standalone аррісайоп...... 7
INSTALLING THE ЅОҒТМАНВЕ..................................---... «а aaa іі ə ы, 10 FOFRCMAGINTOSB:... iti m etn RUE DIU 38
® Starting the software as an Adobe Photoshop plug-in .......................... 38
FOR WINDOWS? 95/98/98S E/ME/NT4.0/2000.................... sse 10 Starting the RD175 Grabber utility software
FOR:MACINTOS H EI ады рый 14 as a standalone application.................. ыы натыныманымынымнаныа 39
INSTALLING THE ADOBE PHOTOSHOP PLUG-IN MODULE
(MAGINTOSEIONIY): эагазде медал ада тө дее д даа ДАН НШЫ 18 USING THE VIEWER PANEL (TWAIN DRIVER/PLUG-IN море),
CAMERA SETUP—SETTING THE CAMERA'S SCSI ID .................. 20 READING IMAGES SAVED IN THE CAMERA (PC CARD), AND
CAMERA SETUP TRANSFERRING THEM TO AN IMAGE PROCESSING APPLICATION
—SETTING THE TERMINATOR'S POWER SUPPLY ................... 22 WINDOW- ariei ышкы Ыы ДЫН. aden Mi ol Ween ae 41
DELETING IMAGES SAVED IN THE CAMERA (PC CARD)..................... 44
CAMERA SETUP a ЕБ E ү )
—CONNECTING THE CAMERA TO YOUR COMPUTER............. 24 USING THE MAIN PANEL (UTILITY SOFTWARE) .......................... 45
SCSI CONNECTOR CABLES—FOR PC/AT-COMPATIBLE COMPUTERS DISPLAYING CAMERA (PC CARD) IMAGES ........................................... 50
cba c Ren dere uv E ifta Ll ОТ КЕТ КОТО rd 24 DISPLAYING IMAGES SAVED ON THE HARD DISK ...............................54
SCSI CONNECTOR CABLES—FOR APPLE MACINTOSH COMPUTERS SAVING IMAGES ON THE HARD ПІбК.....2.2.0......м./.4442. 56
DE 25 DELETING IMAGES DISPLAYED IN THE VIEWER PANEL .....................61
CAMERA SETUP—INSERTING THE PC CARD ............................... 27 REMOTE PHOTOGRAPHY (MACINTOSH UTILITY ONLY) ............. 62
BASIC OPERATIONS arra анына Айаан 28 USING THE PREVIEW PANEL (MACINTOSH UTILITY ONLY)........ 66
OVERVIEW (MAIN PANEL, VIEWER PANEL) ................... eese 28 SAVING IMAGES TAKEN BY REMOTE PHOTOGRAPHY ....................... 66
When starting the software from an image processing application using DELETING AN IMAGE TAKEN BY REMOTE PHOTOGRAPHY ............... 68
the TWAIN driver/plug-in module............................. eee ғғ 28
The Viewer Panel lets you: ................sesseeeneeneenene 28 USING THE CAMERA PANEL (MACINTOSH UTILITY ONLY)......... 70
Мһеп ѕїагііпо ће А0175 Огаррег ийіќу ѕоймаге....................................... 29 FORMATTING THE CAMERA'S РС САВО ............................................... 70
бауед ітадев сап бе.........ешннзнш 29 SYNCHRONIZING THE CAMERA’S CLOCK TO THE COMPUTER’G............ 72
ОМЕВМІЕМ/ (МАІМ РАМЕ, РАЕМІЕМУ РАМЕ) ........................................ 30
Тһе Мгіп Рале! Іеіс уош....олл/л лаға ааа 30 QUITTING THE SOFTWARE (UTILITY БОҒТУ/АНЕ).................... 74
The Preview Panel lets уош:.......о..ллл44ы8а0 ыы 31
Тһе:вауеа !тайеСаг“Бе: нышынын лиен нунын ааа 31
NN ng

BEFORE YOU BEGIN

TERNS USED IN THIS MANUAL

* This manual assumes that your computer's operating system (Windows?
95/98/98 Second Edition/Me (Millennium edition)/2000/NT or Mac OS) as well as
other necessary software such as device drivers have been installed, and are
operating properly.

* |f you are using a Windows? OS, click the Start button, point to Settings, and
click Control Panel. Double-click the System icon, then click the Device Manager
tab. Verify that the name of your SCSI host adapter is displayed in the tree
shown under the SCSI Controller icon.

нон Ренн | тізі

Daran Duns Manage [I Геге |

ТЕ дшше шелге Бр рүн, DO yes iag hy poai

tod. forge

> шшр Od dee

+ Deedes maple

= жор Pope dd orinis:
èi Q Esja piri
3 кела

a ыы

2, Mowe

3
a P ree ripa

ТИНТЕ ТТЕ Т-ты

r ees Coote

Primeran | На жан Аркен | Ini

BEFORE YOU BEGIN

* |n general, the descriptions in this manual are illustrated by the displays for the
Windows? version. There are no major differences between the displays for the
Windows? and Macintosh versions except for some of the button layouts and
other cosmetic features.

* This manual assumes the use of a two-button, right-handed mouse for
Windows®. The terms “click” and “double-click” refer to a single or double click of
the left mouse button. The term ‘drag’ refers to the action of holding down the left
mouse button while moving the mouse.

* |f you are using Macintosh OS, the term "Command Key" refers to the key
located next to the Space Bar.

* Command names shown in this manual which are common both to the Windows?
and Macintosh systems do not indicate any of the shortcut keys found in
Windows? command names.

Example No. 1: The File command appears as "File" on Windows? and "File"
on Macintosh menus, but in this manual it is shown as merely
as “File.”

Example No. 2: The Save command appears as “Save” on Windows® and
“Save” on Macintosh menus, but in this manual it is shown
merely as “Save.”

SYSTEM REQUIREMENTS (WINDOWS?)

The system requirements for the operation of this software are as shown below:

IBM PC/AT and their compatible computers

CPU Intel Pentium? Processor 90MHz or higher

Windows*95 (including OSR2)
Windows?98 / Windows?98 Second Edition
OS Windows®Me (Millennium edition)
Windows®2000 Professional

Windows$NT 4.0

RAM A minimum of 32MB of RAM
Hare DISK 32MB or more of free hard disk space foe use as workspace
Space
Monitor VGA (640 x 480 dots) or higher / High Color (16-bit)
CD-ROM Drive Required for software installation
Adaptec
AVA-2902E*' AHA-1510B AHA-1520B
AHA-1540CP . AHA-2910B AHA-2920C
AHA-2930C AHA-2930CU AHA-2930U2
AHA-2940 AHA-2940U AHA-2940W
Recommended AHA-2940AU AHA-2940UW AHA-2940U2W
SCSI host SCSI Card 19160 (ASC-19160)

SCSI Card 29160 (ASC-29160)
SLIM SCSI 1460 (APA-1460)
SLIM SCSI 1480 (APA-1480)*"*?

*! Can't be used with Windows?NT 4.0.
*2 Used with Windows®95 OSR2 later.

Applications
compatible
with the
operation of
TWAIN drivers

Adobe Photoshop Ver. 3.0.5 / 4.0.1 / 5.0.2 / 5.5 / 6.0
Adobe Photoshop 4.0 LE / 5.0 LE

SYSTEM REQUIREMENTS (WINDOWS?)

Notes

* When using Windows? 95 or NT 4.0, the Minolta RD-175 software’s setup program will install
Winaspi version 4.57. If you install a driver for another SCSI device after you have installed the
Minolta RD-175 software, the device driver’s setup program may automatically reinstall an older,
incompatible version of Winaspi. Reinstall the Monolta RD-175 software if it stops running
properly as a result.

* When using the software with Windows® 2000 or NT 4.0, set the system's virtual memory
manually (M) to at least 100 MB. (This figure is just a guideline, and will depend on the
applications you use at the same time as the Minolta RD-175 software, and other operating
environment parameters.) For how to make the setting, see your PC's manual or the Windows?
help window.

* The guarantee doesn't cover the camera's performance when it's connected to a SCSI host
adapter not shown on page 6, nor does it cover the SCSI host adapter or problems caused by it.
Minolta doesn't guarantee or provide customer support for the operation of the SCSI host
adapter with your computer.

SYSTEM REQUIREMENTS (MACINTOSH)

The system requirements for the operation of this software are as shown below:

Macintosh computer (not a non-Macintosh Mac OS-

Apple Macintosh Series computers

compatible computer) with PowerPC CPU and
standard built-in SCSI port or PCI bus slot

Computer Power Macintosh, Power Macintosh G3, Blue & White
Power Macintosh G3 Series computer, Power Mac G4
Series computer (except Power Mac G4 Cube),
PowerBook/PowerBook G3 with standard built-in SCSI port
os Mac OS 7.6.1 to Mac OS 9.1
(QuickTime™ 3.0 or a later version must be installed)
RAM 24 MB or more of free memory
abaco 32 MB or more of free hard disk space for use as workspace
Monitor 13' (640 x 480 dots) or larger; 32,000 colors or more
CD-ROM Drive Required for software installation
For Power Macintosh, Power Macintosh G3,
PowerBook, PowerBook G3:
Standard built-in SCSI host adapter
(Types that connect to an expansion board or PC card
inserted in the PCI bus, NuBus or PC card slot can't
Recommended | Þe used.)
SCSI host For Blue & White Power Macintosh G3 Series
adapters computers, Power Mac G4 Series computers:
Adaptec PowerDomain 29160N
PowerDomain 2940UW
PowerDomain 2940U2W
PowerDomain 2930 Ultra
SCSI Card 2906
Applications
confirmed as
сотре Adobe Photoshop Ver. 3.0.5 / 4.0.1 / 5.0.2 / 5.5 / 6.0
operation of Adobe Photoshop 4.0 LE / 5.0 LE
the plug-in
module

SYSTEM REQUIREMENTS (MACINTOSH)

Notes

* Minolta doesn't recommend connecting the camera to the Ultra2 Wide SCSI host adapter, which
is a standard feature of some Blue & White Power Macintosh G3 Series models. This SCSI host
adapter has a limited connectable length and other problems that prevent the computer from
realizing its full performance potential. To use the camera with models that come with a standard
Ultra2 Wide SCSI host adapter, mount any of the SCSI host adapters listed on page 8 in the
empty slot, and connect the camera to the host adapter's SCSI connector. Don't remove the
Ultra2 Wide SCSI host adapter.

* The guarantee doesn't cover the camera's performance when it's connected to a SCSI host
adapter not shown on page 8, nor does it cover the SCSI host adapter or problems caused by it.
Minolta doesn't guarantee or provide customer support for the operation of the SCSI host
adapter with your computer.

INSTALLING THE SOFTWARE

Follow one of the procedures below to install the Minolta RD-175 software on your
Windows? or Macintosh computer.

FOR WINDOWS® 95/98/98SE/Me/NT4.0/2000

* |n the procedure below, the hard disk drive for system startup is drive C, and the
CD-ROM drive is drive D.

* Make sure the camera isn't connected to the computer when you install the
software.

ll Turn on the computer to start Windows®.

Insert the Minolta RD-175 CD-ROM into the CD-ROM drive.

After a short wait, the InstallShield Wizard program starts automatically, then
the choose Setup Lunguage window opens.

! = ere
i тарзе

If the InstallShield Wizard program doesn’t start automatically, select "Start" —>
“Run...”. Enter “D:\Driver\Setup.exe” in the “Open” drop-down list and click
[OK].

-10-

INSTALLING THE SOFTWARE

Select the language for the installation and click on [OK].

The License Agreement window appears (shown below). Read the entire
agreement carefully before continuing the setup. If you don’t agree to the terms
of the License Agreement, click [No] to exit the setup program.
[ac | xj
Панна авн
Pare seen! the іссе (соты agrees caret FÉ

Vrai Hae FALE DCRAM bey o rmm nb cmd a ін egre

CAEL ALAD THE LEAT ARPELA ІЛ ГЕП ОРЕН ЕНІП. -
РЫА П ЗГ Гьар. DOPERIHD 2H PALEAGE BRHCATTA YOUR

COP ae fo THE TERrS aD CORR TIOH EELIA VERI DO HOT ABER
BATH THEM VOU SHOULD PROMP TY RETURN THE PACE UNIIREHED

Thr marre gend and ra ars grim drat Mig ed a нін Бест
Кене] Anci ith анчы а ААЦ et ipa P Генаны PG Pe | Ye А н
йй: Кат найы ыл] acp ie Bae cle c a Hus ss c io led Ki ei
аңы Ға тығын ruben ur genres [in ril ici Hu enc Hd cnn ur Hs cope
iba Corsa and inp copo rad кз іп eias Eg Sd rica o: ГЇ ЙЕ gerant

Гол реал мое АЙ e bmi P e pica dang ішсе шимен ^ Demi ohne fé B
ааг ъй сіва Ганй T ponga accepi ы age

Hl Click [Yes].

The window for selecting the folder in which to install the software appears (shown
below).

i xi

Chin Dailies | а-ны»
miery byi hee 9 гыш енй ій Не: Е

Таны edi ana adl FED TP ie He olore: lod

Гага тіне (жін Plame Je reial ia a did icc cei Ё оен ard ruler
тезіне іле

Caim ann ni

Б.Мира НЫП Аган 28 Bein

Continued on Next Page
-11-

INSTALLING THE SOFTWARE INSTALLING THE SOFTWARE

To install the software in the default folder (C:\Program тим zj
Files\MINOLTA\Minolta RD-175), press [Next>]. rena Ға
To install the software in another folder, click [Browse...] to display the window for E
selecting a folder. Specify the directory to install the software in, then click [OK]. mE E ETE ER TIE ет

gs Fides
Click [Next>] to display the window for selecting the setup type (shown below). Es ]
CE | zj
ehap Tee p
X meri eur man omnim mri ғ
Dici йла урын d Leig pe pee han ici Hia я ксі bol cwm
"rei wr Г арала элиг

5 Dea Figur вай ms aiaiai sii da mai coan paom luscanwananidad irr
> FU WU

T peesi Maa вай га гаі ндый аат лагад аг, васе) срасги

The name of the default Program Folder is displayed in

D (yae Ton meheen he mem pu aei єгїз} Heeren ia bec
а reverse. To add the software icons to this folder, click
[Next>].
= е сыш To add the software icons to another existing folder, select it from the folders
M listed in the box below “Existing Folders:”, then click [Next>].
Installation starts when you click [Next>]. When it has finished, the
[H Select the setup type, then press [Next>]. “InstallShield Wizard Complete” window appears (shown below).

Normally, select "Typical". The rest of the descriptions in this manual assume the
"Typical" setup has been selected.

“Compact”: Installs the software with the minimum number of required options.
The software may not run normally with this selection on some
system environments.

“Custom”: Installs only the selected option. Select "Custom" to install just the
TWAIN module, or just the RD-175 Grabber utility software. This

nir afa "LL id

Var ads biased Winged Complete

Viens lun i n icd Pl die nie alio anc led FECIT
Daum pou ram dor Gee pene, po a ree pe
compe

setup type is intended for users with a thorough knowledge of the uec —P"(
software. # На нагы cree a
Click [Next>] to display the window for selecting the Program Folder (shown on the idee

next page).

E Check that “Yes, I want to restart my computer now.” is
selected, then click [Finish].
Setup ends, and the computer restarts.

-12- -13-

INSTALLING THE SOFTWARE INSTALLING THE SOFTWARE

FOR MACINTOSH Click [Accept].

* A window appears for selecting the installation method ("Easy Install" is selected
initially) and the installation location. The names of the volume (disk) name and

Before you begin folder in which the software will be installed appear at the bottom-left of the
Virus protection tools and control panel documentation can cause problems window.
during installation, so remove or temporarily disable these programs during ги ZI TROTUDTUTTI EE
installation. They can be restored afterwards. Гтшл----і | , ,
у | Етан 6j |. Select the installation
Бірде Шр ТТА. ө — —1l method to use.

* Make sure the camera isn't connected to the computer when you install the |
software.

Name of the volume (disk)
and folder in which the

| software will be installed.

li] Turn on the computer to start Mac OS.

авіа Leal

al
неме EDITI iNi iari m "Һе тей _
Tui EA m ETT

When the desktop appears, insert the Minolta RD-175 CD- HL 7%) ШЕГІП!
ROM into the CD-ROM drive. | :

Select or create the folder
in which to install the

Double-click the CD-ROM drive on the desktop to open it. software.
E] Check the folder in which the software will be installed. To
Ej Double-click the “Driver” folder to open it, then double- change it, select “Select folder...” from the “Install
click the “English” folder. location:” pop-up menu, then select an existing folder or
* The “RD-175 Installer” icon appears. create a new one.

Double-click the “RD-175 Installer” icon.

пан [] Select the installation method from the pop-up menu at
“Тһе installer program starts, and the initial window appears.

the top-left. Normally, you don't need to change the
installation method from "Easy Install".

[3 Click [Continue...] in the Installer's initial window.
+ If you select “Custom Install”, the window below appears.

“Тһе Software License Agreement appears. Read the entire agreement carefully
before continuing. Ге ЕТТТ ЕЕ
* You can click [Save As...] to save the Software License Agreement as a text file, SSS тте
or "Print" to print it out. | nmm ы
* If you don't agree to the terms of the Software License Agreement, click [Decline] endende end d ER ЕГІ!

to exit the installer. | |

= ии

Click [I] to the right of a file
to display its information.

Check the check box of the
file you want to install.

ра ше alae id Plo ата аы Ши цена es
imisli Laalin eT

rU "mb

er SPT il need wi w
1и 1-18 "m E

Continued on Next Page

-14- -15-

INSTALLING THE SOFTWARE

W Click [Install].

e Installation starts. Follow the instructions that appear on the screen.
* If Adobe? Photoshop? (LE) has been installed, the plug-in module (“RD175 Plug-

in”) is automatically installed in the ‘Import/Export’ folder in Photoshop’s ‘Plug-ins’

folder.

* If some applications of Adobe? Photoshop? (LE) have been installed, the screen
shown below appears, letting you select the version of Photoshop in which to
install the plug-in module (*RD175 Plug-in").

&ebect Fabdpr
қ mm "ҮТ "PETIT Я
| a Adube Plistashap[p&) 5.5

Cr Eas EHI (E
0 арна
Е ал Ренн Е D L

(-әме || ж”)

Ш Select the desired version of Photoshop®, then click [OK].

* Installation continues. Follow the instructions that appear on the screen.

e If you press [Cancel] instead, you can still install the plug-in module later (see
pages 18 - 19).

• If Adobe? Photoshop? (LE) hasn't been installed, or if only one application has
been installed, the screen above doesn't appear, and installation finishes.

* When installation has finished, the screen below appears.
Ta fon Lal lain eae succeed ae IF ien arm Rid, ihik

Gant in lease fe installer, Pye wna te pero
arditinaai irszaliatians,risk Curtius

Click [Quit].

-16-

INSTALLING THE SOFTWARE

Items installed

If you selected "Easy Install", all the files/folders below were installed. If you
selected “Custom Install’, only the selected (checked) file/folder was installed.

Items installed in the selected/created folder:

RD175 Grabber....... (the application itself)

Put into Plug-in Folder. . (contains plug-in for Adobe Photoshop (“RD175
Plug-in"))

Installer Log File ...... (text file listing each file the installer program

installed, and where it was installed)
Item installed in the "Import/Export" folder in the "Plug-ins" folder in the

version of Photoshop (selected in Step 11):
RD175 Plug-in. ....... (plug-in module)

-17-

INSTALLING THE SOFTWARE

Installing the Adobe Photoshop plug-in module
(Macintosh only)

By installing the plug-in module in the specified folder, you can open RD175 Plug-
in from Adobe Photoshop.

When you install the Minolta RD-175 software, the plug-in module is automatically
installed in a predetermined folder if Adobe Photoshop has been installed on the
computer. If some applications of Adobe Photoshop have been installed, you can
select the application of Photoshop in which to install the plug-in module (see page
16).

Note that the plug-in module isn't installed automatically if you install Adobe
Photoshop after installing the Minolta RD-175 software, or if you select not to
install the plug-in module. In this case, you can install the plug-in module manually
later on by following the steps below.

You don't need to install the plug-in module if using the RD175 Grabber utility
software as a standalone application.

ll Quit Adobe Photoshop (LE) if it's running.

Open the Adobe Photoshop (LE) folder.

Open the "Plug-ins" folder in the Adobe Photoshop (LE)
folder.

fj Open the “RD175” folder, and then the ‘Put into Plug-in
Folder’ within it.

Drag-and-copy the “RD175 Plug-in” icon from the “Put

into Plug-in Folder” to the “Import/Export” folder in the
“Plug-ins” folder.

-18-

INSTALLING THE SOFTWARE

" d fie Edit View Serial Halg

| ista ier Dog File
|

hitab Pisapia G LE йт (кеме ідгеегеніз

Es
Ea

Ww — Parisian

Drag-and-copy the “RD175 Plug-in” icon from the “Put
into Plug-in Folder” to the “Import/Export” folder in the
“Plug-ins” folder.

-19-

CAMERA SETUP-—SETTING THE CAMERA’S SCSI ID

CAMERA SETUP—SETTING THE CAMERA’S SCSI ID

To enable your computer to correctly identify each SCSI device connected to it,
each device must be assigned a unique SCSI ID between 0 and 7. Some
computer models have some reserved SCSI IDs that can’t be used (see table

below).
Reserved SCSI IDs (devices reserved for)
PC/AT-
compatible 7 (SCSI host adapter)
computers

Apple Macintosh
computers

0 (built-in hard disk drive) *
3 (built-in CD-ROM drive) *'*?
7 (computer itself)

*' Some recent Macintosh models have IDE hard disk/CD-ROM drives
instead of SCSI hard disk/CD-ROM drives. SCSI IDs 0 and 3 are

available on these models.

*2 Some Macintosh models have both an internal and external SCSI
bus. The SCSI ID for the external bus (3) is available on these

models.

The camera’s SCSI ID is set to 6 at the time of purchase. If this ID is available,
you don’t need to change the SCSI ID setting before use. Otherwise, check the
SCSI ID assigned to each connected SCSI device, and follow the steps below to

assign an unused SCSI ID to the camera.

- 20 -

lll Slide the Minolta RD-175

main switch to ON while

holding down the Mode

button.

* Keep the Mode button depressed
until the setting has been made.

* The SCSI indicator in the Data
panel goes on to show that the
SCSI mode is on. It also shows the
currently made SCSI ID number
setting.

Release the Mode button.

-24-

PAStill holding down the

Mode button, turn the
Control dial to display an
unused SCSI ID number on
the Data panel.

CAMERA SETUP-—ETIING THE TERMINATOR’S POWER SUPPLY

CAMERA SETUP—SETTING THE TERMINATOR’S POWER SUPPLY

The camera only has one SCSI connector, so it can only be used as the final
device on a SCSI chain. It therefore requires a device called a terminator, which is
built into the camera. This terminator requires a power source.

For IBM PC/ATs and compatible computers
Check the user’s manual of your SCSI host adapter to determine whether the
SCSI host adapter you are using supplies power to the terminator. If it does, you
don’t need to perform the steps below. Otherwise, follow the steps below to
enable the camera to supply power to the terminator.

For Macintosh computers
Users of desktop, mini-tower Power Macintosh/Power Macintosh G3 models, and
of Blue & White Power Macintosh G3 Series/Power Mac G4 Series models don't
need to perform the steps below. Users of PowerBook and PowerBook G3
models with PowerPC CPUs need to follow the steps below to enable the
camera to supply power to the terminator.

ll Slide the Minolta RD-175
main switch to ON while
holding down the Mode
button.

220 . Keep the Mode button depressed

until the setting has been made.

* The SCSI indicator in the Data

panel goes on to show that the
SCSI mode is on. It also shows the
currently made SCSI ID number
setting.

-22.

While holding down the
eU Mode button, press the
Program reset button to
display TERM.PW on the
Data panel.

!
TERMPW BETIS

Release the Mode button.

-23.

CAMERA SETUP—CONNECTING THE CAMERA TO YOUR COMPUTER

camera, and other connected devices.

Before connecting the camera to your computer, be sure to turn off the
camera, computer and all connected devices. Connecting the camera to

your computer when the power is on could damage the computer,

“То turn off the camera, slide the Main Switch to LOCK.

SCSI CONNECTOR CABLES—For

PC/AT-compatible computers

When the camera is the only SCSI device

Amphenol half-pitch 50-pin

If the SCSI host adapter has an >
connector:

If the SCSI host adapter has >
another type of connector:

connected:

Use a SCSI cable with male
Amphenol half-pitch 50-pin
connectors at both ends.

Use a SCSI cable with a connector
that matches the connector of your
host adapter at one end, and has a
male Amphenol half-pitch 50-pin
connector at the other end.

When the camera is the final device on a SCSI chain:

device has an Amphenol half-

If the current terminal SCSI »
pitch 50-pin connector:

If the current terminal SCSI
device has another type of
connector:

- 24 -

Use a SCSI cable with male
Amphenol half-pitch 50-pin
connectors at both ends.

Use a SCSI cable with a connector
that matches the connector of the
current terminal SCSI device at one
end, and has a male Amphenol
half-pitch 50-pin connector at the
other end.

SCSI CONNECTOR CABLES—For Apple Macintosh computers

When the camera is the only SCSI device connected:

For desktop and mini-tower
Power Macintosh and Power
Macintosh G3 computers:

For Blue & White Power
Macintosh G3 Series computers
and Power Mac G4 Series
computers:

For PowerBook and PowerBook
G3 computers with PowerPC
CPUs:

Use a SCSI cable with a standard
Macintosh SCSI port connector at
one end (male D-Sub 25-pin
connector), and a male Amphenol
half-pitch 50-pin connector at the
other end.

Use a SCSI cable with a connector
that matches the connector of your
host adapter at one end, and has a
male Amphenol half-pitch 50-pin
connector at the other end.

Use a SCSI cable that has a
connector that matches the
PowerBook SCSI host adapter
(HDI-30) at one end, and has a
male Amphenol half-pitch 50-pin
connector at the other end.

When the camera is the final device on a SCSI chain:

If the current terminal SCSI
device has an Amphenol half-
pitch 50-pin connector:

If the current terminal SCSI
device has another type of
connector:

»
»

- 25 -

Use a SCSI cable with male
Amphenol half-pitch 50-pin
connector at both ends.

Use a SCSI cable with a connector

that matches the connector of the
current terminal SCSI device at one
end, and has a male Amphenol
half-pitch 50-pin connector at the
other end.

Continued on Next Page

CAMERA SETUP-—coNNECTING THE CAMERA TO YOUR COMPUTER CAMERA SETUP—INSERTING THE PC CARD

lll Open the Slot/SCSI connector How to insert the PC card in the PC card slot is described on
cover on the Minolta RD-175. page 32 in the Minolta RD-175 manual.

HAlign the Amphenol half-pitch
50-pin connector to the camera’s
SCSI connector, and press it in
firmly until it clicks into place.

—] When the camera is the only
connected SCSI device:
Attach the other end of the SCSI
cable to the computer’s SCSI
host adapter.

Chie (AN

When the camera is the final
device on a SCSI chain:
Remove the terminator of the
current terminal SCSI device (or
disable it if built-in), and attach
the other end of the SCSI cable
to the device’s SCSI host
adapter.

- 26 - - 27 -

BASIC OPERATIONS

OVERVIEW (MAIN PANEL, VIEWER PANEL)

To display and save (thumbnail) images saved in the camera PC Card on the
computer:

Bi When starting the software from an image processing
application using the TWAIN driver/plug-in module

Start the image processing application (Adobe Photoshop).

For Windows?

Select "RD-175" as ' TWAIN 32 Source...', then select "TWAIN 32...".

For Macintosh
Select "File" — "Import" — "RD175 Plug-in".

The Viewer Panel appears, displaying thumbnail images of the files saved in

the camera (in the PC Card) (see page 41).

The Viewer Panel lets you:

* Display all the images saved in the camera (PC Card) as thumbnail images.

* Transfer some or all of the images saved in the camera (PC Card) to an image
processing application, for display in a window of that application (when using
the TWAIN driver or plug-in module).

* Save some or all of the images saved in the camera (PC Card) on the connected
computer's hard disk or a similar memory storage device, in various image file
formats (when using the RD175 Grabber utility software).

* Display (as thumbnail images) images saved on the computer's hard disk or
similar memory storage device (when using the RD175 Grabber utility software).

* Delete some or all of the images displayed (as thumbnail images) in the Viewer
Panel.

For information on each operation, see pages 41 to 44 and 50 to 61 in this

manual.

- 28 -

Bi When starting the RD175 Grabber utility software

Start the utility software (see pages 37, 39).

Тһе Main Panel appears (see page 45).

Click [Camera] in the Main Panel.

The Viewer Panel appears, displaying the images saved in the camera

(PC Card) as thumbnail images (see page 50).

Select the thumbnail images you want to save, by clicking on them.

Click [Save] in the Viewer Panel.

Select the folder and image file format in which to save the images. Enter the
desired file name, then click [Save] (see pages 58 to 60).

The images are saved as a file.

Saved images can be:
e Displayed in the Viewer Panel.

* Loaded into other application software (except images saved as MSVD format).
- 29 -

BASIC OPERATIONS

OVERVIEW (MAIN PANEL, PREVIEW PANEL)

To operate the camera from the computer:

Set the image quality and white balance on the camera
(see pages 45 to 46 in the Minolta RD-175 manual).

Start the utility software (see pages 37, 39).

The Main Panel appears (see page 45).

The Main Panel lets you:

* Check the approximate numbers of images left/taken.

* Use the computer to control camera functions (remote photography with or
without exposure compensation’, set the camerais built-in clock and initialize the
PC card).

* Macintosh only

For information on each operation, see pages 45 to 48 and 70 to 73 in this

manual.

Set Exposure compensation from the Main Panel as needed
(Macintosh only).

Click [Capture] on the Main Panel (Macintosh only).

The Preview Panel opens, displaying the image taken by remote photography
(Macintosh only) (see page 64).

The Preview Panel lets you (Macintosh only):

* Display an image taken by remote photography, which has been read from the
camera.

* Save the image from the Preview Panel to the computer's hard disk or similar
memory storage device, in various image file formats.

* Delete the image displayed in the Preview Panel.

For information on each operation, see pages 66 to 68 in this manual.

Click [Save] in the Viewer Panel (see page 66).

- д

Select the folder and image file format in which to save the images. Enter the
desired file name, then click [Save].

The images are saved as a file.

The saved image can be:
e Displayed in the Viewer Panel.
* Loaded into other application software (except images saved as MSVD format)

-31-

STARTING THE SOFTWARE

lll] Perform the camera setup procedures on pages 20 to 27 in
this manual.

Slide the Minolta RD-175
main switch to ON while
holding down the Mode
button.

e The SCSI indicator in the Data
panel goes on to show that the
SCSI mode is on. It also shows the
currently made SCSI ID number
setting.

Turn on the other SCSI devices if any are connected.

- 32 -

STARTING THE SOFTWARE

IFOR WINDOWS"? 95/98/98SE/Me/NT4.0/2000

Starting the software from a TWAIN-compatible image processing
application

In the description below, the TWAIN-compatible image processing application
is Adobe Photoshop 5.0 LE. The screen displays, commands and operations
may be different in other image processing applications. See the image
processing application's manual for more information.

El Turn on the computer and start Windows®.

Feu MÀ ia Áo

fee Pro
n ed bee ee ed dom ee ee
imie ir terrar eet dee
Baden nbh d DEN hi rie et Ei ee
Bu Fa

Sees ee be чғ
mistress Toin Em ei Sd eee

= сз] се |

"idum m ee Em ln ie Bar

Чы omm] amicus m rie iea ш

un Ia NA ITE

# eaa ien no Pere pram Lë iin a
as Pe.

| ТЕТІН | om |
- 33-

The “New Hardware Found” dialog
appears. Select “Do not install a
driver” and click [OK]. Repeat this
operation until the ‘New Hardware
Found’ dialog no longer appears.

The two screens shown here appear in
computers with Windows®95 OSR2 pre-
installed at the time of purchase. Click
[Next>] in the first screen and "Finish"
in the next screen.

In Windows*98, click [Next>] until
"Finish" appears, then press [Finish].

When connecting the RD 175 camera
to the computer, "Add New Hardware
Wizard" dialog box may appear as
shown in the figure. Install the driver
software by following the indication of
the dialog box (refer to the procedure
described on the following pages).

Continued on Next Page

STARTING THE SOFTWARE

Vina ташы кіні Біз шет істі ім

тата ПП!

ree drone ct a bee payee Ной кіт т
baedemn cire өті

жайын йі ры тәне Мі йа ШШ ДЕ?

PC ec ы Ben lm йет ы ғыз іне

Diag Red lal ha гіненігін кекік
жатыны ниг раа леч аы e pm pni sme

қ/н ірет сай enim cd a rmm irrisa a ee ысы иіле
түн әзі гүр. eed ey ae eee ee eed

L Piper в. гып ш тїт
Г Бике тікі жәе

Ранна

- 34 -

(1) When “Add New

Hardware Wizard”
dialog box appears,
click [Next >].

(2) When the dialog box as

shown on the left
appears, select “Search
for the best driver for
your device.
(Recommended)” and
click [Next >].

(3) When the dialog box as

shown on the left
appears, insert the
Minolta RD175 Ver.2.0
CD-ROM into the CD-
ROM drive and put the
check mark on “CD-
ROM drive” and click
[Next >].

(4) When the device driver
is detected and the
dialog box as shown on
the left appears, click
[Next >].

Confirm that
"X:RD175WDM.INF"
appears in the
"Location of driver:"
text box (where "X" is a
drive letter assigned to
the CD-ROM drive on
your computer - it is the
D drive in this example).

so hn ind i жін Гн e жен и
БЕА ГА тп
in a my en roms reer Еа
icu. Dies Boh ics тілге cifra chri, cs clic Не
е s
Leer c? ria
ETA ppan
m

Lue [DERIT] сең |

* If the message "Please insert the disk labeled 'Windows?XX CD-ROM', and then click
OK." appears during installation (XX represents a Windows? version such as '98' or
'Me), remove the Minolta RD-175 CD-ROM from the CD-ROM drive, insert the
Windows? XX CD-ROM into the CD-ROM drive, then click [OK]. If another message
appears prompting you to insert a different disk, follow the instruction that appears on
the screen.

(5) When the installation of
the driver software is
completed and the
dialog box as shown on
the left appears, click
[Finish].

нышта Ерге

mapas бча а тер над із тыя Жы иы тыш

EE сез |

Start Adobe Photoshop 5.0 LE.

[qn Adobe Photoshop 5.0 LE, select “File” > “Import” ^
“Select TWAIN 32 Source...”.
* A screen for selecting the TWAIN source appears.
Continued on Next Page
- 35 -

STARTING THE SOFTWARE STARTING THE SOFTWARE

Starting the RD175 Grabber utility software as a standalone application

ere eee

| pe Ef jug (gmi Di fim Ише Ши Hai

| Hm скен

Шз, иы If you don’t have a TWAIN-compatible image processing application, use the
- i RD175 Grabber utility software as a standalone application.
үт <Continued from page 32.>
ee!
= - El Turn on the computer and start Windows®.
_ Рино Select “Start” > “Programs” > “Minolta RD-175” — “RD-
m 175”.
Select Minolta RD-175 from the source list, then click * The RD175 Grabber utility software starts, and the Main Panel (see page 45)
[Select]. appears.

a x!

El Select “File” > "Import" — "TWAIN 32...".

* The software starts, and the Viewer Panel (see page 41) appears in an Adobe
Photoshop 5.0 LE window.

— » - ,
КЕГІ 11131.

[Бе Б мағ (же Чени Бйз em edes Hen
Нет сан
Сап. Cua
Cyan Be.

- 36 - - 37 -

STARTING THE SOFTWARE

FOR MACINTOSH
Starting the software as an Adobe Photoshop plug-in

In the description below, RD175 Plug-in is installed in Adobe Photoshop 5.0
LE’s ‘Import/Export’ folder. See page 18 in this manual for how to install the

RD175 Plug-in module.

Qj Turn on the computer and start Mac OS.
Start Adobe Photoshop 5.0 LE.

[an Adobe Photoshop 5.0 LE, select “File” — “Import” ^
“RD175 Plug-in Ver. 2.0...”.

“Тһе software starts, and the Viewer Panel (see page 41) appears in an Adobe
Photoshop 5.0 LE window.

қ $ ШІ Edit Image Layer Select Filter View Window

Open...

Save

Save As... 095
Save a Сору... 536 5
Revert

ыты.
Import Ж 6Anti-aliased PICT...
| Bot у Dimage 2300 Import...
DS Multi Plug-in ver.2.0 ...
Page Setup... Q36P PICT Resource...
36P RD175 Plug-in Ver.2.0... ,
Twain Acquire...
b

Preferences Twain Select...

Adobe Online...
E .

Starting the RD175 Grabber utility software as a standalone application

If you don’t have Adobe Photoshop, use the RD175 Grabber utility software

as a standalone application.

fj Turn on the computer and start Mac OS.

Open the folder in which the application was installed (the
folder selected or created during installation).

[3 Double-click the "*RD175Grabber" application icon.

* The RD175 Grabber utility software starts, and the Main Panel (see page 45)
appears after a short wait.

ITNITITET

мішегін іі Fun into Plug-in Felder EDI T556rsbbsr

Double-click the “RD175Grabber”
application icon.

- 39 -

USING THE VIEWER PANEL (TWAIN DRIVER/PLUG-IN MODULE)

The screens displayed by the software, the screen order, and the
functions available differ depending on whether the software was
started from an image processing application using the TWAIN
driver/plug-in module, or the RD175 Grabber utility software was
started.

* Viewer Panel display of images saved on the computer’s hard disk
(see page 54), and Camera Panel operations (see pages 70 to 73)
are only available when the RD175 Grabber utility software was
started. These functions can’t be used when the software was started
using the TWAIN driver/plug-in module.

* Remote photography (see page 62) is only available when the
Macintosh utility software was started up. This function cannot be
used when the software was started using a plug-in module. Remote
photography is not provided in the Windows version.

When starting the software from an image processing application
using the TWAIN driver/plug-in module:
See pages 41 to 44.

When starting the RD175 Grabber utility software:
See pages 45 to 74.

- 40 -

READING IMAGES SAVED IN THE CAMERA (PC CARD), AND
TRANSFERRING THEM TO AN IMAGE PROCESSING
APPLICATION WINDOW

When the software is started from an image processing application using the
TWAIN driver/plug-in module, once the software has correctly recognized the
camera (camera connection), the Viewer Panel (shown below) appears,
displaying the images recorded in the camera (PC Card).

arr Shapes
= OFF

F FoTo]
Г” Ға тақ ык

ГО Гына Ён

1701717

mi Direc Іт —— "ши | тШПЗлкіс
ane? 5117 ал anii =|

Continued on Next Page

-41-

USING THE VIEWER PANEL (TWAIN DRIVER/PLUG-IN MODULE)

{Select the Viewer Panel images you want to transfer to the

image processing application, by clicking on them.

* Selected images are displayed in reverse.

* A selected image can be deselected by clicking on it again with the Ctrl key
(Command key on Macintosh) held down.

* To select more than one image, hold down the Ctrl key (the Command key on the
Macintosh) when clicking on the second and subsequent images.

* To select the succeeding images, click the first image, then click the last image
while pressing down the shift key.

“То select all the images, click “Select All” in the Viewer Panel, or press Ctrl + А
(Command (88) - А оп Macintosh) on the keyboard.

Select the Sharpen (edge enhancement) mode.
* Click one of the radio buttons to display a dot inside the circle.

OFF No processing

USING THE VIEWER PANEL (TWAIN DRIVER/PLUG-IN MODULE)

* When transfer has finished, the images are loaded into the image
processing application, and displayed in a window of that application.
You can now use the image processing application to manipulate the
images as desired. See the manual of the image processing
application.

For Display (Weak) Provides the appropriate edge enhancement for displaying
transferred images (fairly sharp)

For Printing (Strong) Provides the appropriate edge enhancement (sharp) for
printing transferred images.

E] To use a chromatic filter, click the check box to place a
check mark in the box.

e The chromatic filter reduces color bleed at the edges during image transfers.
e Images using the chromatic filter take slightly longer to transfer than images that
do not.

fj Click [Transfer] in the Viewer Panel.

* Ameter window appears while the images are being transferred, indicating how far
the process has advanced.

хі

[айги тайа

-42-

Unable to access to Dimage RD-175

Follow the steps on pages 52 if the message above is displayed,
and Viewer Panel doesn't open.

- 43 -

USING THE VIEWER PANEL (TWAIN DRIVER/PLUG-IN MODULE)

USING THE MAIN PANEL (UTILITY SOFTWARE)

DELETING IMAGES SAVED IN THE CAMERA (PC CARD)

Some or all of the images displayed by the Viewer Panel (as thumbnail images)
can be deleted from the PC Card. The thumbnail images in the Viewer Panel let
you check the images to delete.

{Select the Viewer Panel images you want to delete by
clicking on them.

* Selected images are displayed in reverse.

* A selected image can be deselected by clicking on it again with the Ctrl key
(Command key on Macintosh) held down.

* To select more than one image, hold down the Ctrl key (the Command key on the
Macintosh) when clicking on the second and subsequent images.

* To select the succeeding images, click the first image, then click the last image
while pressing down the shift key.

e To select all the images, click “Select All” in the Viewer Panel, or press Ctrl + А
(Command (88) + A on Macintosh) on the keyboard.

Click [Delete] in the Viewer Panel.

* A confirmation dialog appears.

Do you want to delete files?

E] To delete the images, click [Yes]. To cancel deletion, click
[No].

- 44 -

When you start the RD175 Grabber utility software, once the software has
correctly recognized the camera (camera connection), the Main Panel appears
(shown below).

Click to display images stored in camera.
Number of images left

Windows
Close button
(EJ on left
[ей side of Main
Panel’s title
Number of images Taken bar on
taken Macintosh)
Click to display images
stored on hard disk. Click to make camera
settings.
Exposure compensation
Macintosh display
Click to display/hide [батаға]
the lower part of the i
[T
window, which is : z Lad ,
used to set Click to
exposure perform
compensation. remote
photography.
Exposure compensation slider Exposure compensation

value display/input field

Continued on Next Page
- 45 -

USING THE MAIN PANEL (UTILITY SOFTWARE)

The meaning of each display and the function of each button in the Main Panel is

shown below.

Display/button

Meaning of display; function of button

See page(s):

Display/button

Meaning of display; function of button

See page(s):

‘Left: display

The number of images that can be taken
(recorded) on the PC Card currently in the
camera. ‘— —’ is displayed if the camera isn't
connected or there is no PC Card in the camera.
‘0’ is displayed when no more images can be
taken.

‘Capture’ button

Takes an image by sending a signal to the
connected camera through the SCSI cable
(remote photography). The Preview Panel (see

"Taken: display

The number of images that have been recorded
on the PC Card currently in the camera. ‘— —’ is
displayed if the camera isn’t connected or there
is no PC Card in the camera.

‘Camera’ button

Opens the Viewer Panel (see pages 50 and 56
to 61), which displays the images recorded on
the PC Card currently in the camera (as
thumbnail images). Disabled when the camera
isn’t connected, when there is no PC Card in the
camera, or when ‘Taken: is 0.

(Macintosh only) | page 64) opens and the image is displayed 852085
there. Disabled when the camera isn't
connected.
Opens the Camera Panel (see page 70), which
is used to initialize the PC Card in the camera,

‘Setting...’ button | and set the camera’s built-in clock. Disabled 70 to 73
when the camera isn't connected, or there is no
PC Card in the camera.

Exposiite Indicates that exposure compensation is set.
compensation m
display When exposure compensation isn't set (value is 45, 63

(Macintosh only)

‘0’), this display appears gray (is grayed-out).

Disk’ button

Displays a standard operating system dialog for
specifying a folder. When you specify a folder,
the Viewer Panel (see pages 54 and 56 to 61)
opens, and the images in the specified folder are
displayed (as thumbnail images).

- 46 -

Continued on Next Page

-47-

USING THE MAIN PANEL (UTILITY SOFTWARE)

Display/button Meaning of display; function of button See page:
Arrow button | Displays or hides the lower part of the window,
AS 45, 63
(Macintosh only) | which is used for setting exposure compensation.
Dragging the slider knob sets the exposure
Exposure compensation value. The value can be set
compensation | between -3.0 and «3.0, in 0.5 increments. During 63
slider remote photography, this setting is sent to the
(Macintosh only) | camera and applied to the result. This slider is
disabled when the camera isn't connected.
Displays the currently set exposure compensation
Exposure value. The displayed value changes as you
compensation operate the exposure compensation slider. You
value can click on this field to enter an exposure 63
display/input field | compensation value (between -3.0 and 3.0)
(Macintosh only) |directly from the keyboard. This operation is
disabled when the camera isn't connected.
Close button | Quits the driver software. 74

- 48 -

- 49 -

USING THE MAIN PANEL (UTILITY SOFTWARE)

DISPLAYING CAMERA (PC CARD) IMAGES

lll Click [Camera] in the Main Panel.

* The Viewer Panel opens, and the images stored in the camera (on the PC Card)
are displayed.

rii rdc mus rei mix adc

agmini BI He отаг лл

кіс п тшс КУ ілкі
ami? wiii amm ami E

- 50 -

USING THE MAIN PANEL (UTILITY SOFTWARE)

* The images displayed by the Viewer Panel can be saved on the connected
computer in any location (folder), in any of four image formats. See page 56 in
this manual for more information.

The "Camera" button is disabled when the camera isn't connected, when there is
no PC Card in the camera, or when “Taken:” is 0.

The Viewer Panel screen shot shown on page 50 is the screen displayed when
using the RD175 Grabber utility software. When using the TWAIN driver/plug-in
module, the Viewer Panel's “Save” button is replaced by the "Transfer" button
(shown below).

a ПЕР

-51-

USING THE MAIN PANEL (UTILITY SOFTWARE) USING THE MAIN PANEL (UTILITY SOFTWARE)

[Eror —_ хі (5) After checking the points above, follow the steps on pages 32 їо 39 in

this manual to start the software again.

Unable to access to Dimage RD-175

Follow the steps below if the message above is displayed, and Viewer Panel
doesn’t open.

(1) Click [OK] to close the message window.

(2) Click the close button on the top-right of the Main Panel (select “File”
= “Quit” on Macintosh) to quit the software.

(3) Turn off the camera and computer.

(4) Check the following points:

* |s the SCSI cable connected properly?
Follow the steps on pages 24 to 26 to check its connection.

* |s the SCSI cable partially disconnected from the connector?
Press it in until it clicks into place.

e Is there a break in the SCSI cable or its covering?
Replace the cable with a new one.

e Is the SCSI ID assigned to the camera the same as the ID of another SCSI
device connected to the same computer?
Follow the steps on pages 20 to 21 to change the camera’s SCSI ID to a
unique ID.

e Is the power supply to the terminator set properly?
Follow the steps on pages 22 to 23 to set it properly.

* Was the camera turned on before the computer was turned on?
(Was the computer turned on after the camera was set to PC connection
mode?)
Turn the camera on, set it to PC connection mode, then turn the computer
on.

e Is there a PC Card in the camera?
Follow the steps on page 27 to insert a PC Card in the camera.

-52- - 53 -

USING THE MAIN PANEL (UTILITY SOFTWARE)

DISPLAYING IMAGES SAVED ON THE HARD DISK

lil Click [Disk] in the Main Panel.

* The screen for selecting a folder (directory) appears.

PN Hur!

Select Folder х|

Directory:

4] Desktop
EA My Documents

C] My Music
a ИХ

8) Му Сотриќег
+ My Network Places

C] Online Services

Cancel |

- 54 -

USING THE MAIN PANEL (UTILITY SOFTWARE)

Select a folder (directory) in which image data has been
saved, then click [OK].

“Тһе Viewer Panel opens, displaying the images saved in the selected folder.

ER! DAUTA UM Pur ыш Pr

2 ыр 7 UE. Eri

TEE TET Té EE

* The Viewer Panel displays image files in TIFF, JPEG, BMP (Windows? only),
PICT (Macintosh only) or MSVD (see page 59) format. Files saved in other
image formats (such as PNG, EPS or GIF) can't be displayed.

* When the software was started using the TWAIN driver/plug-in, the Main Panel
doesn't appear, so you can't display images saved on the computer's hard disk
in the Viewer Panel.

* The file formats of images displayed by the Viewer Panel can be changed to one
another. The procedure is as almost same as that of SAVING IMAGES ON THE
HARD DISK described on the next page. Refer to the pages 56 - 60 for details.
In this case, sharpness and chromatic filter settings are available only when a
MSVD file format is converted into other file formats (TIFF, JPEG, BMP, PICT).

- 55 -

USING THE VIEWER PANEL (UTILITY SOFTWARE)

SAVING IMAGES ON THE HARD DISK

ml rade

алла?

^ OFF
F Foppes]
Ры Ренат

P Dspmálo Fils
TOUS reir кїїгє
ГЕНІН ivo ea алт?

| dired wie чт nik mil inde
071171587 атл? алыи 1117

[Select the Viewer Panel images you want to save to the
computer’s hard disk or a similar memory storage device,
by clicking on them.

* Selected images are displayed in reverse.

* A selected image can be deselected by clicking on it again with the Ctrl key
(Command key on Macintosh) held down.

* To select more than one image, hold down the Ctrl key (the Command key on the
Macintosh) when clicking on the second and subsequent images.

* To select the succeeding images, click the first image, then click the last image
while pressing down the shift key.

“То select all the images, click “Select All” in the Viewer Panel, or press Ctrl +A
(Command (88) + Aon Macintosh) on the keyboard.

- 56 -

Select the Sharpness (edge enhancement) mode.
* Click one of the radio buttons to display a dot inside the circle.

OFF No processing

For Display (Weak) Provides the appropriate edge enhancement for displaying
transferred images (fairly sharp)

For Printing (Strong) Provides the appropriate edge enhancement (sharp) for
printing transferred images.

ЕЁ] To use a chromatic filter, click the check box to place a
check mark in the box.

e The chromatic filter reduces color bleed at the edges during image transfers.
* Images using the chromatic filter take slightly longer to transfer than images that
do not.

• Тһе sharpness and chromatic filter settings are not available when the
"Original Format" is selected as an image format in Step Il on page
58.

Continued on Next Page
- 57 -

USING THE VIEWER PANEL (UTILITY SOFTWARE)

Hl Click [Save] in the Viewer Panel.

* The screen for selecting the folder (directory) in which to save the images appears
(shown below).

тізі
Гата | zamar Select the folder (directory) in
which to save the images.
нее |ы = Enter the name of the file in

f
mej TEL S і та _|

т=з |

which to save the images.

Use the drop-down list (pop-up
menu on Macintosh) to select
the image format in which to
save the images.

Select the folder (directory) in which to save the images,
and the name of the file in which to save them.

[4 Use the drop-down list (pop-up menu on Macintosh) to
select the image format in which to save the images.
e In Windows®, you can select “Original Format”, or the JPEG, Bitmap, or TIFF
format.
• Іп Macintosh, you can select “Original Format”, or the JPEG, PICT, or TIFF format.
e If you select "Original Format", the images are saved in the MSVD format
they were recorded in on the PC Card (refer to "Note" on the next page).

- 58 -

Note The Minolta RD-175 stores images on the PC card in a proprietary file
format (MSVD format with an mdc extension). To store data on a PC
hard disk, select “Original Format” in the Select Image Format popup
menu.

The MSVD format can store images that retain the full color
information in compact files. However, it differs from JPEG, TIFF and
other standard image formats in that images cannot be displayed on a
PC screen without the use of RD-175 drivers called up by the RD-175
Grabber utility software or TWAIN/Plug-in.

It cannot be imported by any other application.

“Original Format” is the default setting in the Select Image Format
popup menu. Be sure to select the desired image format when images
are saved.

e When “JPEG? is selected, click [Setting...] ([Option...] on Macintosh) to set the
image quality.

Be ЕЕЕ xj
Ж П Compression 9 ет ра
Пан ін = ------ High Cempressür
: = | Moto = JPEG |
| Е Diras

| Best Depth ¥ |

* Drag the Quality slider knob and click
[OK].

* A higher quality setting will produce a
saved image of higher quality, but the
file size will increase accordingly.

* Alower quality setting will produce
smaller file sizes, but the saved image
will be of lower quality.

Сака =)

Continued on Next Page
- 59 -

USING THE VIEWER PANEL (UTILITY SOFTWARE)

JPEG (Joint Photographic Experts Group):
An international standard originally created for compression and
expansion of still images. JPEG-format images can be full-color (16.77
million colors), and the image data can be compressed to reduce the file
size. JPEG image files are in widespread use since they are both
Windows*?- and Macintosh-compatible, and offer relatively low image
deterioration even with high rates of compression.

Bitmap (BMP):
The standard bit-mapped image format for Windows?. BMP-format
images can be displayed by Microsoft Paint and other applications that
come with the Windows? OS.

PICT: The standard image format for the Macintosh (Mac OS). PICT-format
images can be displayed by Simple Text and other applications that
come with Mac OS.

TIFF (Tagged Image File Format):
A high-resolution bit-mapped file format. Since the TIFF format is
platform-independent, it is compatible with IBM-PC/ATs and compatible
computers, Macintosh computers and a variety of other models. TIFF is
a standard format among commercial printing companies and others
using DTP (DeskTop Publishing) and other high-resolution image data.

Click [Save].
* The selected images are saved in the selected folder (directory), under the entered
file name, and in the selected image format. A meter window appears while the
images are being saved, indicating how far the process has advanced.

[ТУТШ хі

Loading image...

Bag

* When saving has finished, the screen returns to the Viewer Panel.
- 60 -

USING THE VIEWER PANEL (UTILITY SOFTWARE)

DELETING IMAGES DISPLAYED IN THE VIEWER PANEL

You can delete some or all of the images displayed (as thumbnail images) by the
Viewer Panel.

i] Select the Viewer Panel images you want to delete by

clicking on them.

* Selected images are displayed in reverse.

* A selected image can be deselected by clicking on it again with the Ctrl key
(Command key on Macintosh) held down.

* To select more than one image, hold down the Ctrl key (the Command key on the
Macintosh) when clicking on the second and subsequent images.

* To select the succeeding images, click the first image, then click the last image
while pressing down the shift key.

e To select all the images, click “Select All” in the Viewer Panel, or press Ctrl +A
(Command (88) + A on Macintosh) on the keyboard.

Click [Delete] in the Viewer Panel.

• А confirmation dialog appears.

Do you want to delete files?

E] To delete the images, click [Yes]. To cancel deletion, click
[No].

- 61 -

REMOTE PHOTOGRAPHY (MACINTOSH UTILITY ONLY)

You can release the camera’s shutter from the computer. This function is only
available with the Macintosh version of the RD-175 Grabber utility software.
It can’t be used when the software was started using the TWAIN driver/plug-in
module, since the Main Panel doesn’t appear.

ll Before connecting the camera to the computer, follow the
steps on pages 45 to 46 in the Minolta RD-175 manual to
set the white blance.

* The white blance setting can't be made from the computer. Be sure to make them
before connecting the camera to the computer.

Bl Turn the camera off and connect it to the computer (see
page 26).

KlTurn the camera on, set it to the PC connection mode (see
page 32 in this manual), then turn the computer on.

fj Start the RD175 Grabber utility software (see page 39).

* The Main Panel appears.

If needed, set exposure compensation, otherwise go to
Step H.

fq Click [> in the Main Panel.

“Тһе lower part of the window appears to let you set exposure compensation.

- 62 -

Я Set the values by dragging the slider knobs or clicking the
fields on the right and entering values directly from the
keyboard.

* The values can be set between -3.0 and 3.0, in 0.5 increments.

* When (positive) values are entered directly from the keyboard, the plus sign ia not
required.

* When you drag the slider knob, the value displayed in the field changes
correspondingly.

e Click V to hide the lower part of the window (the settings remain in effect).

| Disi |

[ тамыз |

To change the setting, drag
the slider knob or click on
the field on the right and
enter a value directly from
the keyboard.

Continued on Next Page
- 63 -

REMOTE PHOTOGRAPHY (MACINTOSH UTILITY ONLY)

BiClick [Capture] in the Main Panel.

* The camera's shutter is released, and the Preview Panel opens to display the
image.

Стра лиро
Куа =.)

калгай

Sharprass
aon C Fart нйн fei С Раг Рені Сіра)

L1 Chrematic Firar [sae |

- 64 -

REMOTE PHOTOGRAPHY (MACINTOSH UTILITY ONLY)

* You can "Save" or "Delete" the image displayed in the Preview Panel. See “Using
the Preview Panel” on page 66 in this manual for more information.

* There is only one preview panel so when remote photography is continued,
previous images are successively overwritten by subsequent images.

* То save images taken with the Minolta RD-175 during remote photography,
you have to perform the operations described in the Section “SAVING
IMAGES TAKEN BY REMOTE PHOTOGRAPHY” on page 66 prior to clicking
[Capture] to take the next remote photograph.

When the camera is set to AF (autofocus), the shutter isn't released if the
image is out of focus. When you click [Capture], the computer sends a shutter
release signal to the camera for 20 seconds. The shutter is released if the
image is in focus at any point within this time (and when the bulit-in flash has
finished charging).

If the image remains out of focus for 20 seconds, or if the flash didn't finish
charging, the image isn't taken and an error message appears. In this case,
click [OK] to close the error message window. The Main Panel remains as it
was before you clicked [Capture].

When the camera is set to manual focus, the shutter is immediately released
when you click 'Capture' even if the image is out of focus. Manual focus is
handy when the distance to the subject is constant (such as when taking a
series of close-ups or making photographic reproductions of printed
materials).

- 65 -

USING THE PREVIEW PANEL (MACINTOSH UTILITY ONLY)

SAVING IMAGES TAKEN BY REMOTE PHOTOGRAPHY

Timiga гиро
TDCmA

огай

Sharpness
arr W^ rar tapine eat) O Fer Frirfmy "S rura

i Chromabe Fitter

fl Select the Sharpness (edge enhancement) mode.
* Click one of the radio buttons to display a dot inside the circle.

OFF No processing

For Display (Weak) Provides the appropriate edge enhancement for displaying
transferred images (fairly sharp)

For Printing (Strong) Provides the appropriate edge enhancement (sharp) for
printing transferred images.

A To use a chromatic filter, click the check box to place a
check mark in the box.

e The chromatic filter reduces color bleed at the edges during image transfers.

e Images using the chromatic filter take slightly longer to transfer than images
that do not.

Click [Save] in the Preview panel.
* This displays a standard Mac OS Save File dialog box.

- 66 -

save File

(amis =)

a Put into Plug-in Folder [ Desktop ]
Za ni Grabber

[New Folder |

File Name:

Save As Type

z Original Format üptian
JPEG

The subsequent steps are the same as Steps $] and after
on page 58 in this manual (“Using the Viewer Panel”).

• Тһе sharpness and chromatic filter settings are not available when the
"Original Format" is selected as an image format in Step Il on page
58.

- 67 -

USING THE PREVIEW PANEL (MACINTOSH UTILITY ONLY)

DELETING AN IMAGE TAKEN BY REMOTE PHOTOGRAPHY

калага

Sharprass
are WIN ieni j CO Far Printing (otras)

tie F
(1 Cirematic Fitter (seve |

ll Click the Close button in the Preview panel (the box at the
left end of the title bar).

* The Preview panel is closed.

- 68 -

USING THE PREVIEW PANEL (MACINTOSH UTILITY ONLY)

- 69 -

USING THE CAMERA PANEL (UTILITY SOFTWARE)

Using operations from the computer, you can format (initialize) the PC Card in the
camera, and synchronize the camera’s built-in clock to the computer’s clock.
These operations can only be performed when using the RD175 Grabber
utility software. They can’t be performed when using the TWAIN driver/plug-in
module, since the Main Panel doesn’t appear.

FORMATTING THE CAMERA’S PC CARD

Formatting (initializing) a PC Card erases all the image data it contains.
Take care when formatting PC Cards, since once a PC Card has been

formatted, there is no way to retrieve the data it previously contained.

{Click [Setting...] in the Main Panel.

* The Camera Panel appears.

x
Lett 81
er 33 . de |

Format Card:

Synchonize camera's clock with this PC

System Clock : Dec-26.2000 3:08
Camera Clock : Dec-26.2000 9:09

Set Clock |

-70-

USING THE CAMERA PANEL (UTILITY SOFTWARE)

Click [Format].

* A confirmation message appears.

Are you sure you want to format
this card?

No |

Click [Yes].

* Formatting starts. When finished, the Main Panel returns.

-71-

USING THE CAMERA PANEL (UTILITY SOFTWARE) USING THE CAMERA PANEL (UTILITY SOFTWARE)

Using operations from the computer, you can format (initialize) the PC Card in the Click [Set Clock].

camera, and synchronize the camera's built-in clock to the computer's clock. * The date and time data from the computer's built-in clock is transferred to the
These operations can only be performed when using the RD175 Grabber camera, synchronizing the two clocks.

utility software. They can't be performed when using the TWAIN driver/plug-in

module, since the Main Panel doesn't appear. Click [Close] to return to the Main Panel.

SYNCHRONIZING THE CAMERA'S CLOCK TO THE COMPUTER'S

Before performing the steps below, set your computer's built-in clock to
the correct date and time. For Windows®, select “Start” — "Settings"
= “Control Panel” — “Date and Time”. For Macintosh, Select “Control
Panels" — “Date & Time” from the Apple menu.

lll Click [Setting...] in the Main Panel.

* The Camera Panel appears.

хі
Lett 81

Taken

Format Card: Format |

Synchonize camera's clock with this PC

System Clock > Dec-26.2000 3:08
Camera Clock : Dec-26.2000 9:09

Set Clock

- 72 - - 73 -

QUITTING THE SOFTWARE (UTILITY SOFTWARE)

{Click the close button in the Main Panel.
* The RD175 Grabber utility software ends.

* If the software was started as a TWAIN driver/plug-in module from an image
processing application, clicking the close button in the Viewer Panel ends the
driver/plug-in module, and returns to the image processing application.

= |5/ *t——— Close button in the Viewer Panel

- 74 - - 75 -

Minolta Co., Ltd.

Minolta Corporation
Head Office
Los Angeles Branch
Minolta Canada Inc.
Minolta Europe GmbH
Reparatur/Repair
Minolta France S.A.
Minolta (UK) Limited
Minolta Austria Ges. m.b.H.
Minolta Camera Benelux B.V.
Belgian Branch
Minolta (Schweiz) AG
Minolta Svenska AB
Finnish Branch
Minolta Portugal Limitada
Minolta Hong Kong Limited
Minolta Singapore (Pte) Ltd.

3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan

101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.

11150 Hope Street Cypress, CA 90630, U.S.A.

369 Britannia Road East, Mississauga, Ontario L4Z 2H5, Canada
Minoltaring 11, D-30855 Langenhagen, Germany
Senator-Helmken-Strasse 1, D-28197 Bremen, Germany

365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France

7 Tanners Drive, Blakelands, Milton Keynes, MK14 5BU, England
Amalienstrasse 59-61, A-1131 Wien, Austria

Zonnebaan 39, P.O. Box 6000, NL-3600 HA Maarssen, The Netherlands
Prins Boudewijnlaan 1, B-2550 Kontich, Belgium

Riedstrasse 6, CH-8953 Dietikon, Switzerland

Albygatan 114, S-171 54 Solna, Sweden

Niittykatu 6 PL 37, SF-02201 Espoo, Finland

Av. do Brasil 33-A, P-1700 Lisboa, Portugal

Room 208, 2/F, Eastern Center, 1065 King's Road, Quarry Bay, Hong Kong
10, Teban Gardens Crescent, Singapore 608923

9221-2753-11 Х-А101

Printed in Japan

Internet Archive Audio

Featured

Top

Images

Featured

Top

Software

Featured

Top

Texts

Featured

Top

Video

Featured

Top

Mobile Apps

Browser Extensions

Archive-It Subscription

Save Page Now

Full text of "Minolta RD-175 Instruction manual"

See other formats